Notification
Go to Home All Tools Compare Glossary Blog Contact

Ohm's Law Calculator: Voltage, Current, Resistance and Power

Enter any two of voltage, current, resistance or power and get the other two with the working, an Ohm's law wheel, a series and parallel resistor tab and a resistor wattage check.

Circuit Controls Live Updating
INPUT 2 A
0 A Standard: 2 A 10 A
Fine Adjustment:
INPUT 6 Ω
1 Ω Standard: 50 Ω 500 Ω
Fine Adjustment:
Common Presets
W
Common:
The Ohm's Law Wheel Interactive Formula Wheel
V × I I² × R V² / R P W P / I I × R √(P × R) V V V / I V² / P P / I² R Ω P / V V / R √(P / R) I A

The central wheel displays all twelve formula variations. Slices for your active known quantities are shaded.

Interactive Circuit Simulation
+ − V 12.0 V I 2.00 A R 6.0 Ω
Derivation:
V = I × R = 2.00 A × 6.0 Ω = 12.0 V
Electrical Assessment Summary SI Engineering Units
Voltage (V) Solved
12.0 V
Current (I) Input
2.00 A
Resistance (R) Input
6.0 Ω
Power (P) Solved
24.0 W
Power Dissipation vs. Rating 50% Derating Rule
48%
Safe (≤ 50%) Warm (50% – 100%) Overload (> 100%)
Comfortably within thermal limits: Safe operation at or below the 50% derating guide.
Mathematical Working Steps Step-by-step substitution
  1. 1 V = I × R = 2.00 A × 6.0 Ω = 12.0 V
  2. 2 P = V × I = 12.0 V × 2.00 A = 24.0 W
Actions & Export PDF, PNG, CSV & Clipboard
User Guide & Instructions

How to Use the Ohm's Law Calculator

This interactive Ohm's Law Calculator computes Voltage (V), Current (I), Resistance (R), and Power (P) across any electrical circuit. Watch charge carriers flow through the live circuit simulation with dynamically resizing resistor zigzags, explore the geometric Ohm's law triangle, check resistor thermal dissipation against rated wattages, and combine resistors in series or parallel. Results update instantly as you drag sliders or type values.

Step-by-Step Instructions

  1. Choose what to solve: Select Solve for V, Solve for I, or Solve for R. The other two parameters serve as active, intuitive sliders.
  2. Adjust values using sliders or inputs: Drag the smooth range sliders to see immediate visual changes, or use the fine-adjustment stepper buttons and unit dropdowns (µ, m, base, k, M).
  3. Watch the live circuit animation: Charge carrier dots circulate through the battery, wire loop, and resistor. Dot velocity scales directly with current: at 10 A dots move rapidly, while at low current they move slowly.
  4. Inspect the resizing resistor zigzag: As resistance increases, the resistor zigzag physically expands in width and thickness, visually modeling the obstruction to electric current.
  5. Explore the Ohm's Law Triangle & Wheel: The central triangle illustrates the geometric relationship between Voltage, Current, and Resistance. The classic circular wheel below maps all twelve formula variations.
  6. Verify resistor thermal safety: Check the 3-segment power dissipation gauge against your resistor's wattage rating (1/8 W, 1/4 W, 1/2 W, 1 W, 5 W) to ensure the part operates within the 50% derating safety window.
  7. Export or share your results: Use Download Report for a publication-quality PDF or high-resolution PNG image card, Copy or Share for formatted summaries, and Reset to restore default circuit values.

The Science Behind Ohm's Law & Electrical Power

  • • Ohm's Law Fundamental Equation: Formulated by German physicist Georg Simon Ohm in 1827, current through an ohmic conductor between two points is directly proportional to voltage and inversely proportional to resistance.
    V = I × R  |  I = V / R  |  R = V / I
  • • Joule's Law of Electrical Heating: The rate of electrical energy dissipated as thermal heat in a resistor equals the product of potential difference and charge flow rate.
    P = V × I = I² × R = V² / R
  • • Resistors in Series: In a series circuit, identical current flows sequentially through every resistor. Total equivalent resistance is the arithmetic sum.
    R_{total} = R_1 + R_2 + \dots + R_n
  • • Resistors in Parallel: In a parallel circuit, every branch experiences identical voltage drop. Total equivalent resistance is reciprocal sum, always smaller than the smallest branch.
    \frac{1}{R_{total}} = \frac{1}{R_1} + \frac{1}{R_2} + \dots + \frac{1}{R_n}

Tips for Accurate Results

  • • Always check the voltage drop across the resistor itself, not just the supply rail. For example, in an LED circuit, subtract the diode forward drop (typically 1.8V to 3.2V) before calculating R.
  • • Follow the 50% derating rule: ensure actual power dissipation never exceeds half the manufacturer's rated wattage for long-term component reliability.
  • • Ohm's Law strictly applies to linear, ohmic conductors. Non-linear components like diodes, LEDs, transistors, and thermistors require dynamic impedance models.

Worked Circuit Example: 12 V Supply across a 6.0 Ω Resistor

A DC voltage of 12.0 V is applied across a 6.0 Ω load:
1. Current (I): By Ohm's Law, \(I = \frac{V}{R} = \frac{12\text{ V}}{6.0\text{ }\Omega} = \mathbf{2.00\text{ A}}\). The charge carrier dots move briskly at this current level.
2. Power Dissipation (P): Using Joule's Law, \(P = V \times I = 12\text{ V} \times 2.00\text{ A} = \mathbf{24.0\text{ W}}\). Alternatively, \(P = \frac{V^2}{R} = \frac{144}{6} = 24.0\text{ W}\).
3. Thermal Safety Check: A standard 1/2 W small-signal resistor would instantly burn out at 24 W! A high-power chassis-mounted or wire-wound power resistor (rated at ≥ 50 W) is required for safe continuous operation.

Worked Practical Engineering Scenarios

Calculated using the tool's exact mathematical engine with standard SI prefixes. Illustrates common real-world design challenges:

Scenario / Application Voltage (V) Current (I) Resistance (R) Power (P) Thermal Assessment
5V Microcontroller LED Limiter 5.00 V 20.00 mA 250.0 Ω 100.0 mW Safe & Cool (20% of 0.5W)
12V Automotive Indicator Lamp 12.00 V 2.00 A 6.0 Ω 24.0 W Use High-Power Resistor
9V Audio Effects Stompbox 9.00 V 90.00 mA 100.0 Ω 810.0 mW Overload for 0.5W (Use 2W)
3.3V IoT Sensor Pull-up 3.30 V 10.00 mA 330.0 Ω 33.00 mW Safe & Cool (7% of 0.5W)
Lab Bench Power Supply Test 30.00 V 300.00 mA 100.0 Ω 9.00 W Requires Power Load
Engineering Fundamentals

Understanding Ohm's Law & Circuit Theory

Ohm's Law is the cornerstone of electrical engineering, electronics prototyping, and physics education. It governs how direct current (DC) and alternating current (AC RMS) behave through resistive materials.

Water Pipe Circuit Analogy

To visualize Ohm's Law, compare electricity to a closed water pipe network: Voltage is the water pressure forcing liquid forward, Current is the volume rate of water flowing past a point, and Resistance is a narrow pipe restricting flow. Double the pressure and flow doubles; pinch the pipe and flow drops.

Joule Heating & Thermal Limits

When charge carriers encounter resistance, collisions within the conductor's atomic lattice convert electrical potential into kinetic heat (\(P = I^2 R\)). If heat dissipation lags behind energy generation, component temperature rises until smoke, solder melting, or resistor destruction occurs.

Non-Ohmic Devices

Ohm's Law holds only when resistance remains constant regardless of applied voltage. Non-linear components like silicon diodes, LEDs, incandescent lamp filaments, and transistors do not obey a static \(V = IR\) relationship. For these devices, you must analyze dynamic resistance (\(\Delta V / \Delta I\)) across operating curves.

Series vs. Parallel Resistor Combinations

Series Configuration (Chain)

In a series string, electric charge has only one path. Current (\(I\)) is identical through every resistor, while total supply voltage distributes across components in proportion to their resistance (\(V_{total} = V_1 + V_2 + \dots\)).

R_total = R1 + R2 + R3

Parallel Configuration (Branches)

In a parallel circuit, every resistor is connected across the same two common nodes, experiencing identical voltage drop (\(V\)). Current divides among branches according to conductance (\(I_{total} = I_1 + I_2 + \dots\)).

1 / R_total = (1 / R1) + (1 / R2) + (1 / R3)

Was this tool helpful?

Be the first to rate Ohm's Law Calculator: Voltage, Current, Resistance and Power

Tap a star to rate instantly

What do you need to work out next?

Search 278+ free tools by name, or pick a category below. Every one runs instantly in your browser — no signup, nothing to install.

More Utility Tools
AI ADVISOR & COACH

Ask AI Advisor

Ask AI